Total Solution Provider of SEMICONDUCTORS /MODULES/ SYSTEMS. SEMITRON INC.

Flash Player() ʿմϴ.

Card Reader

HOME : ǰҰ > Realtek > Card Reader

PCIe Interface Card Reader
ǰ

The RTS5209 is a PCI Express revision1.1 compliant card reader controller that integrates PCI Express Transceiver, regulators and memory card access units into a single chip. The RTS5209 can support Memory Stick TM, Memory Stick PRO TM, Memory Stick PRO-HG Duo TM, Memory Stick XC TM, Secure Digital TM, Secure Digital High Capacity TM (SDHC), Secure Digital eXtended Capacity TM (SDXC), Multi-Media Card TM and xD-Picture Card TM. The RTS5209 provides internal OTP for SSVID (2bytes) and SSID (2bytes) by Realtek writing utility. The RTS5209 also provides 2 options for LUN setting. You can choose 2-LUN setting for SDXC/MMC and MSXC cards separately or only 1-LUN for SDXC/MMC/MSXC/xD-Picture cards by the driver or internal OTP. A serial EEPROM interface is provided here that could store the desired pre-configuration information. The RTS5209 integrates 3.3V-to-1.8V and 3.3V-to-1.2V regulators and MOSFET for card power switch, and could dramatically reduce the system BOM cost.

ǰ

- Compliant with PCI Express Base Specification Revision 1.1 
- Support 1-Lane 2.5Gbps PCI Express Bus 
- Support 93C46 EEPROM 
- Compliant with SD Part 1 Physical Layer Specification Version 3.0 
- Compliant with SDIO Specification Version 2.00 
- Compliant with MultiMediaCard System Specification version 4.4 
- Compliant with Memory Stick XC Duo Format Specification Version 1.00-00 
- Compliant with Memory Stick XC-HG Duo Format Specification Version 1.00-00
- Compliant with Memory Stick XC Micro Format Specification Version 1.00-00
- Compliant with Memory Stick XC-HG Micro Format Specification Version 1.00-00 
- Compliant with Memory Stick PRO-HG Duo Format Specification Version 1.03-00 
- Compliant with Memory Stick HG Micro Format Specification Version 1.00-00 
- Compliant with Memory Stick PRO Standard Format Specification Version 1.05-00 
- Compliant with Memory Stick Standard Format Specification Version 1.43 
- Compliant with xD-Picture Card Specifications Version 1.2 
- Support the following memory card interfaces: -Secure Digital TM (SD), SDXC, SDHC, MultiMediaCard TM (MMC), Mini-SD, Micro-SD (T-flash), RS-MMC, Mobile-MMC and MMC-micro -MMC 8-bit date mode -SDXC and MSXC up to 2TB -Support SD3.0 SDR-104 (208MHz SD clock), SDR-50 (100MHz SD clock) and DDR 50 (50MHz SD clock) -Memory Stick TM (MS), Memory Stick PROTM (MS-PRO), MS Duo, MS-PRO Duo and Micro-MS (M2) -MSPRO-HG Duo 8-bit date mode -xD-Picture Card TM (xD) includes Type M+, Type M and Type H 
- Support hardware ECC (Error Correction Code) function 
- Support hardware CRC (Cyclic Redundancy Check) function 
- On chip 800ma MOSFET (for 1st LUN) for direct power control of all types memory cards
- On chip 400ma MOSFET (for 2nd LUN) for direct power control of MSXC card. 
- Support SD card lock/unlock function 
- Support SD CPRM function and Memory Stick Pro MagicGate function
 - Support MSXC Power Class 0,1 and 2
- Support Memory Stick Pro MS Formatter function
 - Support PCI Express Clock Request (CLK_REQ#) to save power consumption 
- Built-in variable sampling clock generator to determine correct sampling point for SD3.0 UHS card. 
- Support ASPM L0s/L1 to save power consumption 
- Support Auto-Delink mode to save power consumption
- Programmable Subsystem ID and Subsystem Vendor ID without an external EEPROM 
- Support Spread Spectrum Clock for SD/MMC and MS/MSPRO/HG to reduce EMI effect 
- 48-pin LQFP package

ֿ Application

- PC (Notebook and Desk Top PCs)