Total Solution Provider of SEMICONDUCTORS /MODULES/ SYSTEMS. SEMITRON INC.

Flash Player() ʿմϴ.

Card Reader

HOME : ǰҰ > Realtek > Card Reader

USB 3.0 Card Reader Controller
ǰ

The Realtek RTS5307 USB3.0 Card Reader controller is based upon Universal Serial Bus 3.0 Specification,
which integrates USB 3.0 and USB2.0 Transceivers, MCU, SIE, regulators and memory card access units
into a single chip. It can be linked in Super Speed, High Speed or Full Speed operation and supports
USB2.0/USB3.0 power saving mode. It provides 1LUN or 2LUNs (Logic Unit Number) that can support
Memory Stick TM, Memory Stick Pro TM, Memory Stick PRO-HG Duo TM, Secure Digital TM and MultiMedia Card
TM.
The Realtek USB3.0 Card Reader supports both the internal MCU program ROM and external Serial Flash
interface. With the external Serial flash interface, the control firmware could be easily re-configured through
USB link. This could ease the software developing works and squeeze the prototyping schedule.
The Realtek RTS5307 USB3.0 Card Reader integrates all regulators, clock generation circuitry and
MOSFET components for switching card power, and could dramatically reduce the system BOM cost.

ǰ

- Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
- Compliant with USB Mass Storage Class Bulk only Transport Specification Rev. 1.0
- Compliant with SD Part 1 Physical Layer Specification Version 3.01
- Compliant with MultiMediaCard System Specification version 4.4
- Compliant with Memory Stick XC Duo Format Specification Version 1.00-00
- Compliant with Memory Stick XC-HG Duo Format Specification Version 1.00-00
- Compliant with Memory Stick XC Micro Format Specification Version 1.00-00
- Compliant with Memory Stick XC-HG Micro Format Specification Version 1.00-00
- Compliant with Memory Stick PRO-HG Duo Format Specification Version 1.03-00
- Compliant with Memory Stick HG Micro Format Specification Version 1.00-00
- Compliant with Memory Stick PRO Standard Format Specification Version 1.05-00
- Compliant with Memory Stick Standard Format Specification Version 1.43
- Support Super-Speed(5Gpbs), High-speed (480Mbps) and Full-speed (12Mbps) Data Transfer
- USB bus power operation
- Support USB2.0 LPM / USB3.0 U1/U2/U3 power saving mode
- Support Control, Bulk IN / OUT data pipes
- Support the following memory card interfaces:
-Secure Digital TM (SD), MultiMediaCard TM (MMC), Mini-SD, Micro-SD (T-flash), SDHC, SDXC,
 RS-MMC, Mobile-MMC, MMCPlus and MMC-micro
-Memory Stick TM (MS), Memory Stick PROTM (MS-PRO), MS Duo, MS-PRO Duo and Micro-MS (M2),
 MSPRO-HG Duo, MSPRO-HG Micro and MSXC
-MSRPO-HG and MMC 8-bit Data mode
- Support SD card clock 208MHz (max.) for SDR104 mode.
- Support SD card clock 100MHz (max.) for SDR50 mode and 50MHz (max.) for DDR50 mode.
- Built-in variable sampling clock generator for TX/RX to determine correct sampling point for SD UHS
card.
- Support SDXC / MSXC card up to 2TB
- Support MSXC Power Class 0,1 and 2
- Support Memory Stick Pro MagicGate function
- Support Memory Stick Pro MS Formatter function
- Support SD Lock/Unlock Function
- Support SD Jukebox application (CPRM function)
- Support hardware CRC (Cyclic Redundancy Check) function
- Programmable clock rate for flash memory card interfaces
- Integrated Fast 8051 microprocessor
- External Serial Flash memory interface
- On chip 3.3V and 1.2V regulators
- On chip MOSFET components for direct power control of all types memory cards
- Support Spread Spectrum Clock for SD/MMC and MS/MSPRO/HG to reduce EMI effect
- 48-pin QFN (7x7 mm) package for 1LUN or 2LUNs solutions

ֿ Application

- PC (Note PC, Desk Top PC, Industrial PC)
- Standard Card Reader.
- Digtial Set Top Box